Home) Industry Events
Powder and Bulk Engineering International is a technical publication devoted to readers in the powder and bulk solids market outside North America.
end
end
Advanced Course: Pneumatic Conveying System Design

5-6 December at the University of Greenwich's Wolfson Centre for Bulk Solids Handling Technology in Chatham Maritime, England. Intensive 2-day course covers lean- versus dense-phase pneumatic conveying, different equations for predicting pipeline pressure drop and throughput, a detailed look at bends, differences in powder behavior, and other subjects based on attendee request. Optional third day session on rotary valves is recommended to complement course information. Contact the Wolfson Centre, +44 20 8331 8646 (wolfson-enquiries@gre.ac.uk, www.bulksolids.com).

Rotary Valves

7 December at the University of Greenwich's Wolfson Centre for Bulk Solids Handling Technology in Chatham Maritime, England. One-day course covers the practical aspects of rotary valve technology and can be taken as an additional third day following the advanced course on pneumatic conveying system design. Contact the Wolfson Centre, +44 20 8331 8646 (wolfson-enquiries@gre.ac.uk, www.bulksolids.com).

Crystallization Science and Engineering

17-19 January at the University of Leeds in Leeds, England. Held by the University of Leeds Faculty of Engineering. Three-day short course outlines the fundamental science and engineering of crystallization processes, including laboratory experimental sessions. Contact the conference and events coordinator, +44 (0) 113 343 8104 (cpd@engineering.leeds.ac.uk, www.engineering.leeds.ac.uk/short-courses/).

ICACC18 — The 42nd Annual International Conference and Expo on Advanced Ceramics and Composites

21-26 January at the Ocean Center Conference Center/Arena in Daytona Beach, FL USA. Organized by the American Ceramic Society (ACerS). Contact ACerS, +1 240 646 7054 (customerservice@ceramics.org, www.ceramics.org).

Caking and Lump Formation in Powders and Bulk Solids

23 January at the University of Greenwich's Wolfson Centre for Bulk Solids Handling Technology in Chatham Maritime, England. One-day course focuses on how to maintain free-flowing, lump-free powders and granules in your bulk solids handling, storage, and discharge. Course can be combined with "Undesired Deblending and Separation in Processes and Equipment" course for a reduced fee. Contact the Wolfson Centre, +44 20 8331 8646 (wolfson-enquiries@gre.ac.uk, www.bulksolids.com).

Interplastica 2018

23-26 January at the Expocentre Fairgrounds Moscow in Moscow, Russia. Organized by Messe Düsseldorf. Colocated with Upakovka 2018. Contact Messe Düsseldorf, +49 (0) 211 4560-01 (info@messe-duesseldorf.de, www.upakovka-tradefair.com).

Upakovka 2018

23-26 January at the Expocentre Fairgrounds Moscow in Moscow, Russia. Organized by Messe Düsseldorf. Colocated with Interplastica 2018. Contact Messe Düsseldorf, +49 (0) 211 4560-01 (info@messe-duesseldorf.de, www.upakovka-tradefair.com).

Undesired Deblending and Separation in Processes and Equipment

24 January at the University of Greenwich's Wolfson Centre for Bulk Solids Handling Technology in Chatham Maritime, England. Short course examines the deblending (segregation) of bulk solids and will cover topics such as commonly encountered segregation mechanisms, case study examples, and techniques to minimize segregation effects. Course can be combined with "Caking and Lump Formation in Powders and Bulk Solids" course for a reduced fee. Contact the Wolfson Centre, +44 20 8331 8646 (wolfson-enquiries@gre.ac.uk, www.bulksolids.com).

IPPE — International Production & Processing Expo

30 January-1 February at the Georgia World Congress Center in Atlanta, GA USA. Organized by the US Poultry & Egg Association, the American Feed Industry Association (AFIA), and the American Meat Institute (AMI). Contact Pennie Stathes, +1 678 514 1977 (pstathes@ippexpo.org, www.ippexpo.org).

Titanium Asia

4-6 February at the Grand Hyatt Singapore in Singapore. Organized by the International Titanium Association (ITA). Contact Jennifer King, +1 303 404 2221 (ita@titanium.org, www.titanium.org).

Downstream Processing: Unit Operation in the Chemical and Biochemical Industry

7-9 February at the Hotel Phoenix Copenhagen in Copenhagen, Denmark. Organized by Seydlitz United Consultants. Course uses presentations, exercises, and plenum discussions to provide basic knowledge of downstream processing and the numerous associated unit operations with focus on design principles, operations, and equipment setup. Participants will also be introduced to simple calculations and estimations to help in daily work. Contact Seydlitz United Consultants, +45 29 49 30 40 (info@seydlitz.dk, www.seydlitz.dk).

Nano Tech 2018 — International Nanotechnology Exhibition & Conference

14-16 February at Tokyo Big Sight in Tokyo, Japan. Organized by nano tech executive committee. Contact the Secretariat of the nano tech executive committee, +81 3 5657 0760 (nanotech@jtbcom.co.jp, www.nanotechexpo.jp).

Industrial Air Pollution Monitoring

26-28 February at Weetwood Hall Conference Centre and Hotel in Leeds, England. Held by the University of Leeds Faculty of Engineering. Three-day short course can be taken as a whole or as individual days. Day one focuses on general management issues, including legislation, compliance with authorization conditions, and quality assurance and control; day two and three will focus on measurement and analytical techniques for particulate and gaseous emissions. Contact the conference and events coordinator, +44 (0) 113 343 8104 (cpd@engineering.leeds.ac.uk, www.engineering.leeds.ac.uk/short-courses/).

European Pellet Conference 2018

28 February-1 March at the Stadthalle in Wels, Austria. Organized by OÖ Energiesparverband. Part of World Sustainable Energy Days. Contact OÖ Energiesparverband, +43 732 7720-14386 (office@esv.or.at, www.wsed.at/en).

Measurement of the Properties and Bulk Behavior of Particulate Materials

28 February at the University of Greenwich's Wolfson Centre for Bulk Solids Handling Technology in Chatham Maritime, England. Two-day course covers various methods for determining the behavior of bulk powders and granular particulates and includes laboratory demonstrations. Course is appropriate for plant operators, managers, maintenance personnel, and professionals new to material handling. Contact the Wolfson Centre, +44 20 8331 8646 (wolfson-enquiries@gre.ac.uk, www.bulksolids.com).